PMSA 32 Sinewave Inverter
|
 |
PMSA 32 INVERTER SPECIFICATIONSELECTRICAL |
|||
PARAMETER |
SA32 Inverter |
CONDITION |
|
| Output Power @ 25 deg C Ambient |
2400W 3700W 7000W |
Max Continuous 1/2 Hour Rating Max Surge |
|
| Output Power @ 40 deg C Ambient |
2200W 3550W 7000W |
Max Continuous 1/2 Hour Rating Max Surge |
|
| Voltage Input Range | 20-34V DC | Range | |
| Input Current | 0.06A DC 0.70A DC 120A DC 350A DC |
Stand By Inverter ON - No Load Max Continuous Max Surge |
|
| Demand Start Sensitivity Response Time |
3-30W 1 Second Max |
User Adjustable | |
| Low Voltage Shutdown | 19 - 23V DC | User Adjustable | |
| High Voltage Shutdown | 30 - 34V DC | User Adjustable | |
| Output Voltage | Adjustable from 220 to 240V AC +/- 4% | @ Nominal DC Input, No Load to Full Load |
|
| Output Current | 10A AC 28A AC |
Max Continuous Max Surge |
|
| Output Wave Shape Output Frequency Total Harmonic Distortion |
True Sine Wave 50Hz +/- 0.01% < 4% |
||
| Power Factor Limitations | Nil | ||
| Efficiency | 92% | ||
| Input/Output Isolation | 1875 V AC | ||
| Memory Retention | Permanent | ||
| Operating Temperature Range | -10 °C to 50 °C | ||
| Conforms to standards | AS3100 (wiring), AS3108, AS1044 (EMC), C tick | ||
| MECHANICAL | |||
| Size | 500mm wide x 180mm high x 370mm deep | ||
| Weight | 22kg | ||
| Weight Packed | 25kg | ||
| Input Lead Length | 1.5 metres | ||
| Output Wiring Method | Rear three terminal junction box with conduit knockouts | ||
| Output Socket | Dual switched GPO | ||
| Chassis | Powder coated zinc steel (Wedgwood Blue) | ||
| DC Isolation | Single Pole Circuit Breaker | ||
| Warranty | Yes | ||